How to Maintain Your Shower Arm and Rain Shower
Keeping your shower arm and rain shower in good condition is important so they work well for you, look great, and give a warm feeling in the shower. A shower system, especially a rain shower, is a modern lavishness. But if you do not take good care of them, they will lose their efficiency gradually.
What is a Shower Arm and Rain Shower?
Before talking about the maintenance, here is a brief explanation of what these parts are.
- Shower Arm: It is the part that connects your shower head-or rain shower-to the wall of your bathroom. It sticks out of the wall to point the flow of water towards the shower head.
- Rain Shower: They come in large, broad sizes of shower heads and are designed to imitate the sensation of rain fall. They can definitely be much larger in spray pattern and are installed either from the ceiling or with an extended shower arm to give an exquisite look and feel to the bathroom.
Maintenance is Important
Wear and tear do occur in the shower arm and the rain shower as well. Over time, mineral deposits, soap scum, and water will cause blockage or result in low water pressure.
1. Cleaning Frequently
Mineral, soap scum, and grime build up may decrease the water pressure and obstruct the small openings in your rain shower head. To avoid this:
- Shower Arm: Just wipe out the shower arm by gently using a damp cloth. Or prepare an appropriate cleaning solution to remove any buildup at the base of where it meets the wall.
- Rain Shower: For showers, cleaning is particularly vital. For this purpose, the shower head is soaked in equal ratios of white vinegar and water for half an hour to one hour.
2. Leak Detection
Leaks can appear around the shower arm or where it connects. It might be a sign of wear, or perhaps a loose connection. Leaking can lead to wasting water, besides sometimes bringing in water damage to your walls. To avoid this,
- Check periodically for drips of moisture at the joint where the shower arm meets the wall. Should you observe drips or moisture, it may be time to tighten the shower arm connection or replace the gasket inside the joint.
- Sometimes, water can leak at the bottom of your rain shower or joint where it meets the arm. So, check its threads and turn the joint with a wrench on it. Be very careful not to overtighten as this may damage the wrench or still do little to loosen.
See also; The Role of HVAC Contractors in Retrofitting Older Homes
3. Check Water Pressure
Low water pressure happens due to blocked spots within the rain shower or shower arm. If your rain shower is not providing you with the water flow that you are looking for:
- Check the nozzles or the arm for blockages. Mineral buildups can often cause a partial restriction of water flow. A soaking in vinegar or descaling solution will clear most blockages.
- Check the overall water pressure at the main supply. Should you discover that you have low water pressure generally, now is probably the time to call in a plumber to check the overall system.
4. Look for Evidence of Corrosion or Rust
Shower arms and rain showers, being most fixtures, are typically made of metals like stainless steel or brass. Left exposed for extended periods, it will quickly break down or rust, particularly if the coating begins to deteriorate. To prevent rust:
- Dry up the shower arm and rain shower right after use to minimize moisture build-up.
- Apply protective coating or sealant to the fixtures, which will prevent rust from forming.
5. Replacement of Worn-Out Parts
Finally, if a damage is serious whether it is leaking, rust or low water pressure then it’s probably the time to consider replacement of parts. Shower arms tend to be inexpensive, and rain shower heads are offered in various price levels. Replacement of any worn-out component assures your shower continues to operate effectively.
Conclusion
Shockingly, simple steps are needed to extend the life of your shower arm and rain shower. Regular cleaning, ensuring there is no leakage, and that water pressure is sufficient will tell whether your system is in good working condition. Maintenance goes a long way in making sure that your shower daily routine remains refreshing and enjoyable.